|
Processor family :
E3-1200 v3 series ProcessorsEntry Processors
Intel® Pentium® G3240 (3.1GHz/2-core/3MB/54W) Processor
Intel® Pentium® G3220 (3.0GHz/2-core/3MB/54W) Processor
NOTE: Intel ®Pentium® G3220 processor, performance for 1600MHz memory is clocked down to 1333MHz.
Intel® Pentium® G3420 (3.2GHz/2-core/3MB/54W) Processor
NOTE: Intel® Pentium® G3420 Processor supports up to 1600MHz DDR3 memory speeds.
Base Processors
NOTE: All support up to1600MHz DDR3 memory speeds.
Intel® Core™ i3-4150 (3.5GHz/2-core/3MB/54W, HT) Processor
Intel® Core™ i3-4130 (3.4GHz/2-core/3MB/54W, HT) Processor
Intel® Core™ i3-4130T (2.9GHz/2-core/3MB/35W, HT) Processor
Performance Processors
NOTE: All support up to 1600MHz DDR3 memory speeds.
Intel® Xeon® E3-1220v3 (3.1GHz/4-core/8MB/80W)
Intel® Xeon® E3-1231v3 (3.4GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1241v3 (3.5GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1271v3 (3.6GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1281v3 (3.7GHz/4-core/8MB/82W, HT)
Intel® Xeon® E3-1230v3 (3.3GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1230Lv3 (1.8GHz/4-core/8MB/25W, HT)
Intel® Xeon® E3-1240v3 (3.4GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1265Lv3 (2.5GHz/4-core/8MB/45W, HT)
Intel® Xeon® E3-1270v3 (3.5GHz/4-core/8MB/80W, HT)
Intel® Xeon® E3-1280v3 (3.6GHz/4-core/8MB/82W, HT)
NOTE: HT indicates that the processor model supports Intel® /Hyper-Threading Technology (depends on the processor).
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may depend on the quantity and type of DIMMs and CPU installed (options for 1600MHz, 1333MHz).
سرور HP Proliant Server DL320e G8 V2
|
|
Cache Memory :
۸MB (1x8MB) Level 3
NOTE: For Quad-core processors. |
|
Chipset :
Intel® C222 Series Chipset
NOTE: For more information regarding Intel® chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/. |
|
Upgradeability :
Up to 4 DIMM slots available for higher Memory capacity
Up to 4 bay SFF Hot plug Drive Cage; Or 2 bay LFF Hot plug or Non hot plug Drive Cages
۲ PCIe 3.0 expansion slots
Optical Drive Bay
سرور HP Proliant Server DL320e G8 V2
|
|
On System Management Chipset :
HP iLO (Firmware: HP iLO 4)
NOTE: For more information, visit: http://www.hp.com/go/ilo |
|
Memory Protection :
Advanced ECC |
|
Memory :
Type
HP SmartMemory
Unbuffered (UDIMM)
DIMM Slots Available
۴ DIMMs (2 Channels/ 2 DIMMs per channel)
Maximum Capacity (UDIMM)
۳۲GB (4 x 8GB@1600MHz)
NOTE: HP memory from previous generation servers are not fully compatible with the HP ProLiant DL320e Gen8 Servers.
NOTE: To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional information, please see the HP SmartMemory QuickSpecs at: http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE: Depending on the memory configuration and processor model, the memory speed may run at 1600MHz, or 1333MHz. Please see Memory Population Table or the Online Memory Configuration Tool at: www.hp.com/go/ddr3memory-configurator. |
|
Network Controller :
HP Ethernet 1Gb 2-port NC332i Adapter
NOTE: The HP ProLiant DL320e Gen8 v2 server has an embedded dual-port network adapter. The server can be further upgraded with various networking products
سرور HP Proliant Server DL320e G8 V2
|
|
HP Server ROM :
HP ROM (Read Only Memory) is now digitally signed using HP’s Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.
HP’s ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP’s RBSU (ROM based setup utility) user guide: www.hp.com/support/rbsu. |
|
Storage Controller :
Base Models
HP Dynamic Smart Array B120i Controller
NOTE: B120i has the following performance with regards to drive speed: 6Gb/s – in 2LFF and 4SFF only with port 0 & 1 installed; 3Gb/s – in 4SFF with more than 2 drives installed. For full 6 Gb.0/s speed a stand up card/smart array controller must be used.
NOTE: B120i supports RAID 0/1/10 only. It does not have FBWC support so cannot support advanced RAID (5 onwards). For FBWC, a standup Smart Array Controller card must be configured.
Performance Models
HP Smart Array P222/512MB FBWC controller
NOTE: P222 can support RAID 0/1/10/5/50. More advanced options available with Smart Array Advanced Pack 2.0.
NOTE: The DL320e Gen8 v2 can support other advanced controllers as well, depending on model and configuration
NOTE: For set up instructions for HP Smart Array B120i SATA Controller please refer to the HP ProLiant DL300 series server user guide.
NOTE: For general information about HP Smart Array B120i SATA RAID Controller, please visit:
http://h18004.www1.hp.com/products/servers/proliantstorage/arraycontrollers
/dynamicsmartarray/index.html
سرور HP Proliant Server DL320e G8 V2
|
|
Internal Storage Devices :
Diskette Drive
None
Optical Drive
Optional
DVD-RW
NOTE: Slim-type (9.5mm)
Hard Drives
None ship standard (Base Models and Performance Models)
Hard Drive Bays
۴ SFF drive bays or 2 LFF Non hot plug/Hot plug
NOTE: HP ProLiant DL320e Series servers offer both SFF, and LFF versions in CTO. The Optical Drive bay is available with both models.
NOTE: LFF versions are not an upgradeable option from SFF models, or vice versa, also between Non Hot Plug LFF and Hot Plug LFF.
NOTE: All Pre-configured Models come populated with some hard drive blanks installed. Should the customer need additional hard drive blanks, they can order more using either P/N 666987-B21: HP SFF Gen8 Hard Drive Blank Kit or P/N 666986-B21: HP LFF Gen8 Hard Drive Blank Kit. These part numbers for single HDD blanks below are also provided should the customer require replacement HDD blanks for their server.
سرور HP Proliant Server DL320e G8 V2
|
|
Maximum Internal Storage :
Hot Plug SFF SAS
۴٫۸TB
۴ x 1.2TB
Hot Plug SFF SATA
۴٫۰TB
۴ x 1TB
Hot Plug LFF SAS
۸٫۰TB
۲ x 4TB
Hot Plug LFF SATA
۸٫۰TB
۲ x 4TB
Hot Plug SFF SAS SSD
۱٫۶TB
۴ x 400GB
Hot Plug SFF SATA SSD
۳٫۲ TB
۴ x 800GB
Hot Plug LFF SATA SSD
۱٫۶ TB
۲ x 800GB
Non-Hot Plug LFF SATA
۶TB
۲ x 3TB
سرور HP Proliant Server DL320e G8 V2
|
|
Interfaces :
Video
۱ Rear standard video
HP iLO Remote Management Network Port
۱Gb Dedicated
Micro SD slot
۱ Internal
NOTE: The Micro SD slot is not a hot-pluggable device. Customers should not attempt to plug a Micro SD card into the slot while the server is powered.
USB 2.0 Ports
۵ total: 2 rear, 2 front, 1 internal (Optional)
USB 3.0 Ports
۲ total: 2 rear
سرور HP Proliant Server DL320e G8 V2
|
|
Industry Standard Compliance :
ACPI 2.0b Compliant
PCIe 3.0
PXE Support
WOL Support
USB 2.0 Compliant
USB 3.0 Compliant |
|
Common Slot Power Supply :
NOTE: The default power supply for DL320e Gen8 server is either a 250W Non Hot Plug, Non Redundant (ATX) power supply for regions other than Europe, or a 300W Non Hot Plug, Non Redundant (ATX) power supply for Europe
A Common Slot 48V DC power supply (750W, 94% efficiency) supporting NEBS compliance is available only for the 4 SFF configuration.
NOTE: Selecting the 750W power supply requires the HP DL320e Gen8 v2 CS FIO Enablement Kit
NOTE: Power Specification and Technical Content for supported power supplies can be found at: http://h18000.www1.hp.com/products/quickspecs/14209_div/14209_div.html
سرور HP Proliant Server DL320e G8 V2
|
|
System Fans :
۲ front fan assemblies and 1 center fan assembly ship standard, non-redundant |
|
Operating Systems and Virtualization Software Support for ProLiant Servers :
Microsoft Windows Server
Canonical Ubuntu Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
VMware
NOTE: For more information on HP’s Certified and Supported ProLiant Servers for OS and Virtualization Software and latest listing of software drivers available for your server including how to purchase from HP, please visit our OS Support Site at: http://www.hp.com/go/ossupport and our driver download page: http://www.hp.com/support/DL320eGen8v2. |
|
Graphics :
Integrated Matrox G200 video standard
۱۲۸۰ x 1024 (32 bpp)
۱۹۲۰ x 1200 (16 bpp)
HP iLO 4 On System Management Memory
۱۶ MB Flash
۲۵۶ MB DDR 3 with ECC (112 MB after ECC and video) |
|
Form Factor :
۱U Rack form factor
۴ SFF Drive Bay Version:
۱٫۷″ (۴٫۳۲cm) Height x 17.11″ (۴۳٫۴۶cm) Width x 15.07″ (۳۸٫۳۰cm) Length
۲ LFF Drive Bay Version:
۱٫۷″ (۴٫۳۲cm) Height x 17.11″ (۴۳٫۴۶cm) Width x 15.07″ (۳۸٫۳۰cm) Length |
|
On System Management :
HP iLO Management Engine
HP iLO Management Engine is a comprehensive set of embedded management features supporting the complete lifecycle of the server, from initial deployment, through ongoing management, to service alerting and remote support. HP iLO Management Engine comes standard on all HP ProLiant Gen8 servers. The HP iLO Management Engine portfolio includes:
HP iLO: The HP iLO (Integrated Lights-Out) management processor is the core foundation for the HP iLO Management Engine
HP Agentless Management: Provides built in server health monitoring and alerting capability without OS agents, that starts working the moment a power cord and an Ethernet cable are connected.
HP Active Health System: Always on, continuous monitoring for increased stability and shorter downtimes; 100% configuration history; Health and service alerts and easy export and upload to Service and Support.
HP Intelligent Provisioning: Lets customers provision and configure a single server without any separate media. No more SmartStart CDs or Smart Update Firmware DVD are needed.
To start Intelligent Provisioning:
Press the F10 key during the ProLiant Gen8 server boot process (also known as power on self test or POST).
Please go to the Intelligent Provisioning website at www.hp.com/go/intelligentprovisioning for additional information and to view usage videos.
Use the Service Pack for ProLiant (SPP) at www.hp.com/go/spp to get firmware and software updates.
HP iLO Mobile App: Enables the ability to access, deploy, and manage your server anytime from anywhere from select smartphones and mobile devices. For additional information please visit: www.hp.com/go/ilo/mobileapp
NOTE: For more information, visit: http://www.hp.com/go/ilo or HP iLO Management Engine technologies whitepaper |
|
HP Insight management :
HP Service Pack for ProLiant (SPP) and HP Smart Update Manager (HP SUM) provide a comprehensive approach to firmware and system software maintenance. Together they provide better operating stability and ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new HP server hardware launches. By enabling firmware to be updated online and integrating firmware and system software updates in one operation, HP SUM and the SPP offer faster updates of individual. Further improving system uptime and stability is the fact that HP provides 12 months of support for each Service Pack for ProLiant release.
The user experience around HP SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HP SUM and the latest SPP. Optional smaller subsets with only specific types of servers or specific operating systems are offered to save on download time. The HP SUM application provides a straightforward, intuitive user interface that guides the user through the steps of discovery, analyses and update, providing comprehensive information on available updates, criticality and interdependencies. This information is also available in reports. By providing the option of multiple local or shared repositories which can be easily updated from hp.com, HP SUM provides the tools to optimize stability and consistency throughout the company. While HP SUM and the SPP recommend the combinations of firmware and system software that HP has found to be the best practice, the application gives customers the flexibility to set their own specific baseline.
The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server This testing ensures the highest quality as well as providing the input for HP SUM to deploy updates taking into account all interdependencies, when determining the correct updates and order of update deployment.
NOTE: The Service Pack for ProLiant (which includes HP SUM) can be downloaded from www.hp.com/go/spp/download. More information can be found: http://www.hp.com/go/SmartUpdate, www.hp.com/go/spp and http://www.hp.com/go/hpsum |
|
