|
Processor family :
Intel® Pentium® Processor G4400 (3M Cache, 3.30 GHz)
Intel® Xeon® Processor E3-1225 v5 (8M Cache, 3.30 GHz) |
|
Cache Memory :
۸MB (1 x 8MB) Level 3 cache
NOTE: For Quad-core Intel Xeon® processors
۳MB (1 x 3MB) Level 3 cacheسرور اچ پی ML10 G9
NOTE: For Dual-core Intel Pentium® and CoreTM i3 processors |
|
Chipset :
Intel® C236 Chipset
NOTE: For more information regarding Intel® chipsets, please see the following
URL: http://www.intel.com/products/server/chipsets/سرور اچ پی HP Proliant Server ML10 G9 |
|
Upgradeability :
Up to 6LFF Non-hot plug SATA 3.5″ drives
NOTE: HPE ML10 Gen9 HDD Cable Screw Kit (#841425-B21) is required if install
the 5th drive. If the 6th drive is required, must purchase HPE ML10 Drive Enablement
Kit (#836739-B21).
Optical Drive Bayسرور اچ پی HP Proliant Server ML10 G9
NOTE: When install ODD, HDD can support up to 5 drives.
NOTE: To install ODD, must purchase HPE ML10 Gen9 Slim ODD Enablement Kit
(#۸۳۶۷۴۲-B21). |
|
On System Management Chipset :
Intel® Active Management Technology (Intel® AMT 11.0)
NOTE: The server supports the Intel Standard Manageability when the Intel Pentium or
Core i3 processor is installed. The server supports Intel AMT when the Intel Xeon
processor is installed in the system.سرور اچ پی ML10 G9
NOTE: For more information, visit: http://www.intel.com/technology/platformtechnology/
intel-amt |
|
Memory Protection :
ECC |
|
Memory :
Type:
DDR4 Unbuffered (UDIMM)
DIMM Slots Available 4 4 DIMMs (2 Channels/ 2 DIMMs per channel)
Maximum Capacity
(UDIMM)
۶۴GB (4 x 16GB UDIMM @2133MHz) سرور اچ پی ML10 G9
NOTE: For information regarding HPE Server Memory visit:
http://www.hp.com/go/memory. |
|
Network Controller :
Intel® Ethernet Connection I219-LM |
|
HP Server ROM :
HP ROM (Read Only Memory) is now digitally signed using HP’s Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.
HP ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.سرور اچ پی HP Proliant Server ML10 G9
HP ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.سرور اچ پی HP Proliant Server ML10 G9
HP’s ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (Integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration (using the HP ROM-Based Setup Utility (RBSU).
NOTE: For further information, please refer to HP’s RBSU (ROM based setup utility) user guide: www.hp.com/support/rbsu. |
|
Storage Controller :
Intel RST SATA RAID |
|
Internal Storage Devices :
One of the following depending on model:
Optical Drives Optional SATA 9.5mm DVD-ROM Optical Drive
Optional SATA 9.5mm DVD RW Optical Drive
NOTE: When install ODD, HDD can support up to 5 drives.سرور اچ پی HP Proliant Server ML10 G9
NOTE: To install ODD, must purchase HPE ML10 Gen9 Slim ODD Enablement Kit (#836742-B21).
Hard Drives 1 x1TB HPE LFF SATA HDD included in Performance Model
Hard Drive Bays 4 LFF Non-hot plug SATA 3.5″ drives
Up to 6 LFF Non-hot plug SATA 3.5″ drives |
|
Maximum Internal Storage :
Non-Hot Plug LFF SATA
۲۴TB
۶ x 4TBسرور اچ پی HP Proliant Server ML10 G9
NOTE: Requires purchase of optional HP ML10 4 LFF Hard Drive Enablement Kit (#742971-B21) |
|
Interfaces :
Display Port 2 (rear)
NOTE: To connect to a VGA monitor, a DisplayPort to VGA Active Dongle is required.
NOTE: Video output is design for DisplayPort 1.2.
Network RJ-45 (Ethernet) 1 (rear)
USB 3.0 4 (4 rear)
USB 2.0 3 (2 front, 1 internal) |
|
Industry Standard Compliance :
PCIe 3.0 Compliant
PXE Support
Microsoft® Logo certifications
USB 2.0 /3.0 Support |
|
Common Slot Power Supply :
۳۰۰W Multi-Output Power Supply |
|
System Fans :
One (1) Non-redundant system fan
|
|
Operating Systems and Virtualization Software Support for ProLiant Servers :
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)سرور اچ پی HP Proliant Server ML10 G9
NOTE: For more information on HPE’s Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please
visit our Support Matrix at: http://www.hp.com/go/ossupportand our driver download
page: http://h20566.www2.hpe.com/portal/site/hpsc?ac.admitted=1447391526103.
۱۲۵۲۲۵۷۰۳٫۱۹۳۸۱۲۰۵۰۸٫ |
|
Graphics :
GPU Support (Xeon Only)
NOTE: Embedded GPU support for Xeon processor only. |
|
Form Factor :
Up to 6LFF Drive. |
|
Security :
Power-on password
Setup password
Power switch security
Administrator’s password
TPM 1.2
TPM 2.0سرور اچ پی HP Proliant Server ML10 G9
NOTE: HPE Trusted Platform Module 2.0 Option (745823-B21) works with Gen9 servers with UEFI Mode not Legacy Mode. It is not compatible with HPE ProLiant Gen8 servers or earlier generation variants. HPE Gen9 servers purchased earlier may need the latest firmware update to be compatible with the TPM 2.0 Option. The earlierسرور اچ پی HP Proliant Server ML10 G9
HPE Trusted Platform Module Option (488069-B21) is the TPM 1.2 version, which is also available however TPM 2.0 has newer technology standards incorporated. The TPM 1.2 compatible server platforms include Gen8 and Gen9 servers. HPE server systems can have a TPM module (of any type) installed only once. It cannot be replaced with any other TPM module.
UEFI |
